Pattern Updates
We work very hard to create the best possible product but occassionally something slips by our eagle eyes. If we discover an error, we’ll publish it here. If you think you’ve found an error and it is not here, then please write to us at sherri@bordercreekstation.com or call us at 705-689-0525. We’ll figure it out together.Please accept our apologies for any inconvenience caused by our error.
BCS 1165 Criss Cross Applesauce
Please update your pattern with the following corrections, on page 3 for the first step of the Cornerstones: |
Thank you!
Mystery Quilt - Quilter's Grace 2021
Installment 1, Part 3. The C unit should have been cut from a 5” width strip and subcut into 3-1/2” x 5” units.As it was only discovered at Installment 4, Part 1 can be easily solved by trimming the unit to measure 3-1/2 x 5”.
BCS Mystery Quilt - Quilter's Inspiration 2019
Installment 3, Page 1, Part 1. Yes, you have done everything correct! Please note the sewn block should measure 8-1/2" x 8-1/2" unfin. (not the 6-1/2" as typed - this is a typo).
Installment 4, Page 1, Part 1. Same thing - Please note the sewn block should measure 8-1/2" x 8-1/2" unfin. (not the 6-1/2" as typed - this is a typo).
Installment 6, Page 4 The Evidence Room Inventory, Baggie D. Mysteriously some squares ended up here...but rest assured they should not be there. It is a mystery to me too! lol. Please write that Baggie D should be Empty!
Installment 8, Page 3 for the Lazy Lap Size Only.
Part 3: Adding Border 4. Please change the instructions to the following:
Top & Bottom:
1. From (2) strips cut from each (1) 4-1/2” x 12” pc. leaving the
remaining 4-1/2” x 30” section.
2. Join the short end of (1) 4-1/2” x 12” strip to (1) 4-1/2” x 42”
strip to make one longer strip. Press seams open. Repeat to
make a total of (2) strips. Attach these longer border strips to
the quilt center TOP & BOTTOM sides. Press seam to this border.
Trim ends even with quilt top.
Left & Right Borders
1. Join the short end of (1) 4-1/2” x 30” strip to (1) 4-1/2” x 42”
strip to make one longer strip. Press seams open. Repeat to
make a total of (2) strips. Repeat to make a total of (2) strips.
attach these longer border strips to the quilt center LEFT &
RIGHT sides. Press seam to this border. Trim ends even with quilt
top.
Please note that your Host Shop has access to the corrected digital copies and are able to email you a copy of the installment.
Kindly contact them directly.
Thank you!
BCS Mystery Quilt - Sweet 16
Installment 3, Part 2, Method B on Page 3 there is a correction to the fabric used for the cutting.
Please note that this is ONLY for the Method B and using the Quilt In A Day Flying Geese Ruler.
The following corrections should be made on Page 3:
Method B: Quilt in a Day™ Flying Geese - for 3” x 6” Finished Size (3-1/2” x 6-1/2” unf.)
For use with the Quilt in a Day™ Flying Geese Ruler: Cut fabric as follows:
|
|
Cut 7-1/2” wide strips of fabric x 42” WOF |
| |
Cut 9” wide strips of fabric x 42” WOF |
Please accept our apologies for this error. We work extremely hard to ensure that all of the information is correct on all of our patterns.
The above information is also posted on the Shop Host page for the BCS Mystery Quilt Club – please ensure that your shop checks this for any updates.
BCS Mystery Quilt - Quilter's Legacy
Month 5, page 2, part 3:| Fabric #3 |
Cut 7” wide strips of fabric X 42” WOF |
Total |
|
|
Quaintly Queen |
Cut 3 strips |
Subcut strips into 7” x 7” squares. |
16 pcs. |
BCS 1133 If The Hat Fits
The fabric requirements on the back of the pattern do not include the amounts for the applique pieces. These amounts should be as follows:For Applique Pieces:
Witch's Hat - Top: Black Small Print 9"x 20"
Witch's Hat - Brim: Black Solid Print 3" x 8"
Witch's Hat - Sash: Purple Tonal Print 3" x 6"
Witch's Hat - Buckle & Star: Yellow Small Print 3" x 5"
Words: Black Solid Print 3" x 20"
Please note that all other fabric requirements are correct.
BCS Mystery Quilt Club - Quilter's Retreat
Installment 8: For BOTH Queen and Lap Sizes:
Page 4, Part 4, Step 3:
3. Now cut the following fabric:
|
Fabric #1 |
From Scraps… |
Total |
|
Lazy Lap |
Y: Cut (8) 3-1/4” x 3-1/4” squares. Subcut |
16 pcs. |
|
Z: Cut (4) 4-3/4” x 4-3/4” squares. |
4 pcs. |
|
|
Quaintly Queen |
Y: Cut (8) 3-1/4” x 3-1/4” squares. Subcut |
16 pcs. |
|
Z: Cut (4) 4-3/4” x 4-3/4” squares. |
4 pcs. |
BCS 1137 Winter Joy
For the first printing of this pattern, please note the following corrections:Page 5, Step 2 cutting for piece A should be:
|
A: Background – Light Cream Tonal fabric: |
Total |
|
|
Cut (1.5) 2” x 42” WOF strips |
Subcut strips into 2” x 2” pcs. |
24 pcs. |
The same block occurs on Page 12, Step 3. The cutting should be:
|
C: Background – Light Cream Tonal fabric: |
Total |
|
|
Cut (11) 2” x 42” WOF strips |
Subcut strips into 2” x 2” pcs. |
168 pcs. |
The fabric requirements provided for in the pattern will be correct if you cut down the size that was originally instructed (2-1/2") to the corrected 2" size as noted above.